Prior to the enactment of the food additives amendment to the Federal Food, Drug, and Cosmetic Act, sanctions were granted for the usage of the substances listed in §§ 181.23, 181.24, 181.25, 181.26, 181.27, 181.28, 181.29, and 181.30 in the manufacture of packaging materials. So used, these substances are not considered “food additives” within the meaning of section 201(s) of the Act, provided that they are of good commercial grade, are suitable for association with food, and are used in accordance with good manufacturing practice. For the purpose of this subpart, good manufacturing practice for food-packaging materials includes the restriction that the quantity of any of these substances which becomes a component of food as a result of use in food-packaging materials shall not be intended to accomplish any physical or technical effect in the food itself, shall be reduced to the least amount reasonably possible, and shall not exceed any limit specified in this subpart.
Substances classified as antimycotics, when migrating from food-packaging material shall include:
Substances classified as antioxidants, when migrating from food-packaging material (limit of addition to food, 0.005 percent) shall include:
Substances classified as driers, when migrating from food-packaging material shall include:
Substances classified as drying oils, when migrating from food-packaging material (as components of finished resins) shall include:
Substances classified as plasticizers, when migrating from food-packaging material shall include:
Substances classified as release agents, when migrating from food-packaging material shall include:
Substances classified as stabilizers, when migrating from food-packaging material shall include:
Substances used in the manufacture of paper and paperboard products used in food packaging shall include:
*Under the conditions of normal use, these substances would not reasonably be expected to migrate to food, based on available scientific information and data.
(a) Acrylonitrile copolymers and resins listed in this section, containing less than 30 percent acrylonitrile and complying with the requirements of paragraph (b) of this section, may be safely used as follows:
(1) Films. (i) Acrylonitrile/butadiene/styrene copolymers - no restrictions.
(ii) Acrylonitrile/butadiene copolymers - no restrictions.
(iii) Acrylonitrile/butadiene copolymer blended with vinyl chloride-vinyl acetate (optional at level up to 5 percent by weight of the vinyl chloride resin) resin - for use only in contact with oleomargarine.
(iv) Acrylonitrile/styrene copolymer - no restrictions.
(2) Coatings. (i) Acrylonitrile/butadiene copolymer blended with polyvinyl chloride resins - for use only on paper and paperboard in contact with meats and lard.
(ii) Polyvinyl chloride resin blended with either acrylonitrile/butadiene copolymer or acrylonitrile/butadiene styrene copolymer mixed with neoprene, for use as components of conveyor belts to be used with fresh fruits, vegetables, and fish.
(iii) Acrylonitrile/butadiene/styrene copolymer - no restrictions.
(iv) Acrylonitrile/styrene copolymer - no restrictions.
(3) Rigid and semirigid containers. (i) Acrylonitrile/butadiene/styrene copolymer - for use only as piping for handling food products and for repeated-use articles intended to contact food.
(ii) Acrylonitrile/styrene resin - no restrictions.
(iii) Acrylonitrile/butadiene copolymer blended with polyvinyl chloride resin - for use only as extruded pipe.
(b) Limitations for acrylonitrile monomer extraction for finished food-contact articles, determined by using the method of analysis titled “Gas-Solid Chromatographic Procedure for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food-Simulating Solvents,” which is incorporated by reference. Copies are available from the Center for Food Safety and Applied Nutrition (HFS-200), Food and Drug Administration, 5001 Campus Dr., College Park, MD 20740, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(1) In the case of single-use articles having a volume to surface ratio of 10 milliliters or more per square inch of food-contact surface - 0.003 milligram/square inch when extracted to equilibrium at 120 °F with food-simulating solvents appropriate to the intended conditions of use.
(2) In the case of single-use articles having a volume to surface ratio of less than 10 milliliters per square inch of food-contact surface - 0.3 part per million calculated on the basis of the volume of the container when extracted to equilibrium at 120 °F with food-simulating solvents appropriate to the intended conditions of use.
(3) In the case of repeated-use articles - 0.003 milligram/square inch when extracted at a time equivalent to initial batch usage utilizing food-simulating solvents and temperatures appropriate to the intended conditions of use.
(c) Acrylonitrile monomer may present a hazard to health when ingested. Accordingly, any food-contact article containing acrylonitrile copolymers or resins that yield acrylonitrile monomer in excess of that amount provided for in paragraph (b) of this section shall be deemed to be adulterated in violation of section 402 of the Act.
Sodium nitrate and potassium nitrate are subject to prior sanctions issued by the U.S. Department of Agriculture for use as sources of nitrite, with or without sodium or potassium nitrite, in the production of cured red meat products and cured poultry products.
Sodium nitrite and potassium nitrite are subject to prior sanctions issued by the U.S. Department of Agriculture for use as color fixatives and preservative agents, with or without sodium or potassium nitrate, in the curing of red meat and poultry products.